According to a report by the U.S. Fire Administration, more than half home fires are a result of faulty Electrical Wiring. In most of the cases, the quality of House Wiring was not up to the mark, causing a short circuit and then leading to an unavoidable fire. In other cases, House Wiring was not installed properly. Given this fact, homeowners must ensure that the Electrical Wiring for their home should not only be of utmost quality but also be installed by the professional electricians only. Read on to know more about the usual electrical wiring problems and the wiring solution available.
Though there are several electrical problems such as power surges, intermittent power and overloaded circuits, improperly installed wiring remains as the major one. All these issues are. however, not that difficult to recognize and can be mended as well. Let’s know more:
Intermittent Power:
Intermittent power is generally caused by loose wiring system in the premises. To test this sort of electrical problem, homeowners are advised to thoroughly examine the electrical wires from the unit to the plug. There may be sign of frayed or exposed cabling. In case the electrical wiring is worn out at the connection point, use wire clippers to cut the damaged part. To remove the plastic covering of the wire, use wire strippers. Expose the wires and then you can simply reconnect the power wire to the electrical item it was earlier attached to.
Power Surges:
Power Surges occur due to the abrupt increase of power by the electricity companies. Well, there is no way out to this problem at consumer level but getting power bars for the electronic systems can be the best solution. Plug bars come with an integral circuit which eventually diminishes down the power surges without any slightest damage to the system.
Overloaded circuits
Overloaded circuits are caused when many electronic appliances are plugged in single source of power and draw power at the same time. In such cases, short fuses occur as a result of increased power demand. Ask the electrician to balance the circuit load in a standardized manner so that there is no chance of overloaded circuits.
Apart from the above-mentioned fact, there might other reasons as well that may result in sudden fire break. Homeowners, on the first part, should ensure that the complete House Wiring should be done by the professionals. Secondly, if Fire Resistant Wires are there in the wiring system, it would be an added advantage.
Leave a comment